Heavy Duty Forklift
  • How to repair the drive axle housing of forklift?
    10

    Mar, 2022

    How to repair the drive axle housing of forklift?
    The drive axle housing of the forklift is firmly installed on the frame of the forklift. Due to the rigid connection between the drive axle and the frame, the drive axle will bear most of the weight when forklift forks or carries and stacks goods. In addition, when the road is uneven and the fork load is uneven. In this way, the drive axle will be bent and broken, the bearing hole of the half shaft sleeve and the Journal of the half shaft sleeve will be worn. 1. Inspection and repair of forklift drive axle housing bending 1) Inspection of drive axle housing bending. Before inspection, first correct the flatness of the half shaft and the plane contact flange at the hub end to eliminate the end face circular runout error, then install the standard half shaft on the drive axle housing, calibrate the bearing, and test the center position of the left and right half shafts from the housing to judge whether there is bending. The difference between the two axes shall not be greater than 0.75mm. 2) When the bending of the drive axle housing exceeds the limit, it shall be corrected. During correction, the correction deformation shall not be greater than the original bending deformation, and the correction pressure shall be maintained for a period of time to make the axle housing obtain certain plastic deformation. If the deformation is too large and the bending deformation is greater than 2mm, it can be corrected after preheating, but the heating temperature is not allowed to exceed 700 ℃. The cast axle housing should preferably avoid heat correction. 2. Repair of broken forklift drive axle housing: The crack in the middle of the drive axle housing and the crack on the flange can be repaired by welding. The key points of operation are as follows: 1) Make a 90° V-shaped groove along the crack, and its depth is 2/3 of the thickness. 2) Drill 5mm diameter holes 6-10mm from the two ends of the crack. 3) When repairing cracks by electric welding, the welding layer shall be higher than the base metal, but not more than 1mm. Repair welding shall be carried out on the reverse side after the front side is welded, and the weld shall be leveled after welding. If the welding repair is on the working plane, the flatness error shall not be greater than 0.25mm. 4) After the crack is repaired by welding, the reinforced web shall be welded at the crack, with a thickness of 4-6mm. The reinforced web shall be symmetrical with the center of the drive axle housing. 5) If the crack penetrates to the drive axle housing cover or the flange plane of the main reducer, the reinforcing web ring shall be welded after repair welding. The reinforcing web ring on the plane of the drive axle housing cover can be reconnected on the outside, and the main reducer housing should be reconnected on the inner surface depending on the permission of the internal space. When welding the reinforcing web ring, the reinforcing web ring shall be tightly pressed on the plane with bolts to avoid position...
    View details
  • SLD brand 16 tons diesel forklift delivery
    30

    Nov, 2021

    SLD brand 16 tons diesel forklift delivery
    SLD brand 16 tons diesel forklift delivery to west african port service company for empty container stacking operation. Engine: CUMMINS engine (6BTAA5.9-C190) Transmission: Hydraulic transmission Fork length: 1800mm Side shift&Fork position
    View details
  • 4tons,7tons forklift are ready to be delivered to african market.
    25

    Nov, 2021

    4tons,7tons forklift are ready to be delivered to african market.
    4tons,7tons forklift are ready to be delivered to african market.
    View details
  • 25tons forklift for port steel coil handling
    16

    Nov, 2021

    25tons forklift for port steel coil handling
    25tons forklift for port steel coil handling,top chinese configuration,Dongfeng Cummins,Weichai engine options.
    View details
  • 1 unit 25 ton forklift was sent to same customer from Philippines
    19

    Apr, 2020

    1 unit 25 ton forklift was sent to same customer from Philippines
    1 unit 25 ton forklift was sent to same customer from Philippines In 2019, This customer from Philippines ordered our 1 unit 30 ton forklift use in their container port. This year 2020 he make a new order of 1 unit 25 ton forklift from us. This customer is a shipping company, we sold them 30 tons 25 tons forklifts with mast lifting height 5500 to satisfy their working requirements of lifting and stacking 3 layer full containers. Economic forklifts bring higher investment on returns. Customers recognize our product quality and our service. Looking forward to our more and more cooperation in near future.
    View details
  • 2 units 45 ton container reach stackers to Africa
    09

    Mar, 2019

    2 units 45 ton container reach stackers to Africa
    2 units 45 ton container reach stackers to Africa At the beginning of this year, 2 units 45 ton container reach stackers were delivered to Africa by 1x40FR and 2x 40OT. Sales is just the beginning. It is our responsibility to continue to serve customers. Welcome to inquire us anytime if you are also interested in our 45 ton container reach stackers, Will send you more details and solutions according to your actual requirements.
    View details
  • Heavy duty forklifts 12 ton ~35 ton from China has different market strategy
    08

    May, 2018

    Heavy duty forklifts 12 ton ~35 ton from China has different market strategy
    Heavy duty forklifts 12 ton ~35 ton from China has different market strategy. As we all known, world famous brands of heavy-duty forklifts are Konecrane, Kalmar, TCM, Hyster, Linde, Sany, Heli etc. their main key parts are CUMMINS or VOLVO engine, ZF transmission, KESSLER drive axle and steering axle, Parker or Linde hydraulic system etc. Indeed very good performance but also very high price and expensive maintenance cost. In order to more customers can have heavy duty forklifts to satisfy their working requirements. There are the other series heavy duty forklifts with different configurations with much lower price from us in China. Through advanced design technology optimize configurations to achieve high-quality performance. Customers not only can buy good quality heavy duty forklifts with much lower price, but also can be easy to buy spare parts with cheap price. Less purchase cost and lower maintenance cost bring higher investment on your returns. Welcome to inquire us anytime, will be happy to provide a set of solutions for your reference. One more choice, one more chance.
    View details
  • Why choose our SLD 45 ton container reach stacker
    19

    Jan, 2018

    Why choose our SLD 45 ton container reach stacker
    Why choose our SLD 45 ton container reach stacker ? 1,Good quality product Purchased parts, self-made parts and technology , these 3 key factors are very important for considering product quality. Our SLD 45 ton container reach stacker has absolute advantages on these key factors. (1) Main key parts (Purchased parts) Main parts are from import famous brands. For example, America CUMMINS brand CUMMINS QSM11 engine, German ZF brand ZF/5WG261 AUTO transmission, German Kessler brand D102PL341 driven axle and Kessler L102 steering axle,world class Linde hydraulic system, America Parker brand CANBUS control system etc. (2), Self-made structural parts Our parent company (Hailu group) is focusing on design, manufacture and detection of large steel work over 30 years experience . It has became one long-term partner for Noell from 2002 till now, and also provide customized made structural parts for many famous companies , such as Linde forklift, Terex Noell, Husiman, IHISCE, NKM Noell and Mitsubishi heavy Industries. Now we are awarded by Linde forklift company as their excellent supplier. In addition, ourselves-made big telescopic boom are also sold to Liugong and XCMG for their reach stackers. By the way, our high quality structural members are widely bought and used by some customers for their Konecrane Kalmar reach stackers for repair and replacement. Our high quality structural parts tested and approved by the market, belongs to leading position in steel structure manufacturing industry. Better choice. (3), Technology of SLDR450 reach stacker 45 tons Improve the performance many times base on the original Linde technology. Because Linde container transport equipments( 45 ton container reach stacker and empty container handler) was bought by KONECRANE in 2013, so we invited Senior technical engineers from Linde to joint our technical department. Through improved technology base on previous Linde technology, our reach stacker brings higher performance and better sense of experience for our customers. 2,  Highest cost performance in Chinese brands of reach stackers 45 ton Besides good quality container reach stacker, the highest cost performance in Chinese brands is also our important advantage. Our brand SLD is not so famous as Konecrane, Kalmar, Hyster, Sany etc, It is our disadvantage. But we can provide best competitive price to our customers. You can buy high-quality products with the least money and improve the return on investment. Please contact us anytime if want to know attractive price. 3, Warranty period and after-sale service Warranty period: One year or 2000 working hours whichever ends first. During the warranty period, except wearing spare parts, we will freely provide spare parts for replacement in case of parts broken based on normal operation of machines. Parts supply: We will try our best to provide some wearing parts for free together with units when delivered. In addition, also suggest purchase some spare pa...
    View details

A total of 1 pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsapp